StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter - Assignment Example

Cite this document
Summary
This work called "Design and Simulation of a Flexible Multi-Input and Single-Out Boost Converter" describes the capacities and qualities of both the persistent current mode (CCM) and spasmodic current mode (DCM). The author outlines the boost converter can convey control with the most elevated amount of productivity of 95%…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91% of users find it useful

Extract of sample "Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter"

Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter: A Smart DC Transformer Student’s Name University Affiliation Abstract The dynamic qualities of a boost converter are notable and principally depend on the inductor current. By and large when the present which is coursing through the inductor is more than zero, then the circuit works in the constant conduction mode (CCM) while when the current is zero then-then, the circuit works in the irregular conduction mode (DCM). Persistent inductor current mode is ordinarily described by current streaming constantly in the inductor amid the whole exchanging cycle in a relentless state operation. For DCM, it happens because of the switch current or voltage to invert which incorporate the current to voltage unidirectional presumptions which are made in acknowledging if the switch is damaged. It is exceptionally normal in the DC-DC converters and rectifiers which are having single quadrant switches. Passing by late writing, they put more accentuation on proposing new control calculations giving few insights concerning the converter support show utilized. At the constant exchanging events, directing the on and off time of the switch which is known as heartbeat width-adjustment (PWM) of the exchanging. The paper inspected the outline and reenactment of an adaptable multi-information and single-out (miso) support converter: a savvy dc transformer. In view of the outline which was proposed, PSCAD was utilized as a part of the reenactment procedure to help in planning the boost converter's execution. The consequences of reproduction of the boost converter with the particular info voltage and the obligation cycle. The exploratory estimation being done to help in checking the execution of the boost changed over proposed. Supply of force is associated with Vin and a resistance load is associated with Vout as appeared in writing. The outcomes demonstrate that to acquire correct numerical correspondences, it is important to incorporate non-perfect segment models of aloof and dynamic components. It is likewise vital to note that from the proposed plan, the boost converter can deliver a steady yield voltage of around 24 voltage frame a variable voltage of sun based board. The boost converter can convey control with the most elevated amount of effectiveness of 95%. The parts had been picked in light of genuine thought of the normal result. The review proposes zones of further reviews which incorporate, exploring the single inductor various yield switch of DC-DC converters, researching more than three sorts of force circulation and recreation and inspecting the small scale turbine control era and power electronic converter. Table of Contents Abstract 2 1.0 Introduction 4 2.0 Basic operation 5 3.0 Characteristic of CCM and DCM 6 3.2 Discontinuous conduction mode 9 5.0 Simulated system 12 5.1 Process of selecting electronic switch 14 5.2 The inductor selection 14 5.3 Diode selection 15 5.4 Capacitor selection process 15 6.0 Simulation results 15 7.0 The results of experiment 16 8.0 Conclusion 18 9.0 Areas for further study 19 Bibliography 20 1.0 Introduction With much popularity in the recent past, the boost converter is simple and adored power circuit, and it is widely used in uninterruptible power supply (UPS) units, in photovoltaic energy conversion system among others (Wang, Liu, Ma and Chen 2015). The dynamic qualities of a boost converter plainly known and principally relies on upon the current of the inductor. By and large when the present which is smooth in the inductor is more than zero, then the circuit works in the consistent conduction mode (CCM) while when the current is zero then-then, the circuit works in the intermittent conduction mode (DCM) (Lee and Jung 2016). The circuit investigation should be possible effectively utilizing variable based math in conditions when there are enduring state states of current. Coincidentally, any dynamic changes in the parameters may realize moves between modes which make the examination issue furthermore troublesome (Garcia, Pomilio and Spiazzi 2013). A great many people expect the operation mode in the reproduction procedure (Lee and Jung 2016). For a moment, most DC/DC converters it is worthwhile to work in the CCM mode, and consequently, converter control examination is done like there was the main mode through which operations of the circuit happens (Garcia, Pomilio and Spiazzi 2013). While a boost converter can be utilized as an AC/DC converter with PFC is normally worked in the DCM mode, it can likewise be utilized at the mode move limit. For this case, any model ought to be in a position to consolidate both methods of operation (Garcia, Pomilio and Spiazzi 2013). Ceaseless inductor current mode is ordinarily portrayed by current streaming persistently in the inductor amid the whole exchanging cycle in an enduring state operation. For DCM, it happens because of the switch current or voltage to invert which incorporate the current to voltage unidirectional suspicions which are made in acknowledging if the switch is damaged. It is exceptionally regular in the DC-DC converters and rectifiers which are having single quadrant switches. Passing by late writing, they put more accentuation on proposing new control calculations giving few insights concerning the converter support show utilized. In a review by Wang, Liu, Ma and Chen (2015) it existing models and portray the qualities of numerous DC/DC converters, without leading any exploratory approval. The utilization of these model can be utilized by wind control era or sun oriented vitality generation. Concerning photovoltaic power era framework, photovoltaic cells demonstrate with an agreeable interface are fabricated utilizing Matlab or Simulink reproduction programming. A simple photovoltaic generation framework is set up utilizing the PSCAD/EMTDC electromagnetic transient recreation programming (Lee and Jung 2016). Another important concept is static converter which can be explained as an electrical circuit that can manage the transfer of energy between a generator and a receiver (Lee and Jung 2016). The converter efficiency should be good and the components constituting a converter include elements like capacitors, inductors, and transformers with minimum losses and power semiconductors which are operating as switches (Lee and Jung 2016). 2.0 Basic operation The essential capacity of the boost converter is to go about as a medium of force transmission and to perform vitality assimilation and infusion from the sun powered or twist board to the matrix tied inverter (Nge, Naing, Lwin and Latt 2014). The mix of four components that incorporate an inductor, electronic switch, and diode and yield capacitor plays out the work of vitality ingestion and infusion in the boost converter (Lee and Jung 2016). The process can be shown in the schematic diagram below:- Figure 1: Boost converter The above chart showed the connection of boost converter. The procedure of vitality retention and infusion will constitute an exchanging cycle (Nge, Naing, Lwin and Latt 2014). The figure above shows that the normal yield voltage is controlled by turning on and off time length. At the consistent exchanging events, controlling the on and off time of the switch which is known as heartbeat width-course (PWM) of the exchanging. The dedication of exchanging cycle, k is portrayed as the degree of the length of the exchanging time frame. The osmosis and imbuement of importance with the relative length of the exchanging time frame will handle the converter in two particular modes which are called steady conduction mode (CCM) and Discontinuous conduction mode (DCM) (Wang, Liu, Ma and Chen 2015). 3.0 Characteristic of CCM and DCM 3.1 Continuous Conducting Mode Under the CCM, it is allocated two modes. The fundamental mode starts when the switch SW is turned on at the time (t) is equivalent to zero (Zhang, et al., 2014). The present data which rises goes through inductor L and switches SW. amidst the mode, the criticalness is secured in the inductor and load is given by capacitor current. The second mode begins when the turn is killed at the time (t) = kT. The present that was going through the switch would then course through inductor L, diode D, yield capacitor C, and load R. The current of inductor for the most part falls until the switch is turned on again in the going with cycle. Amidst this time, the exchanging of vitality set away in the inductor to the store made with the voltage out of information (Zhang, et al., 2014).Therefore, the voltage of the output is greater than the input voltage, and this can be expressed as follows:- Where Vout is explained as the output voltage, k is duty cycle, and Vin is the input voltage The two process can be presented in the two figures below:- Figure 2: Circuit diagram of boost converter during Mode 1. Figure 3: The diagram of circuit boost converter during Mode 2. For someone to operate the converter in CCM, the inductance is calculated in such a way that the current that flow through inductor IL flows continuously and never falls to zero(Zhang, et al., 2016). The formula for this is given by Where: - Lmin is the minimum inductance R is output resistance f is described as the switching frequency of switch (SW) The wave flow can also be captured in the diagram below Figure 4: Boost converter waveforms at CCM. To get desired voltage output, the capacitance will be given by Where in this case Cmin is the minimum capacitance and Vr is output voltage ripple factor. The Vr can also be expressed as:- The CCM investigation results are exceptionally significant since it indicates how the yield voltage relies on upon the obligation cycle and the information voltage or then again how the obligation cycle can be computed in light of the information voltage and yield voltage (Dogra and Pal 2014). The enduring state utilized here suggests that the information voltage and the yield voltage, yield stack current, and the obligation cycle are settled and not fluctuating (Dogra and Pal 2014). 3.2 Discontinuous conduction mode Under the DCM, here the inductor current IL does not flow continuously (Garcia, Pomilio and Spiazzi 2013). There is an interval of time through which the current is zero before the next turn on of switch SW. Taking integral of inductor voltage over one period to zero. This is given by VinkT + (Vin-Vout) Δ1T = 0. Therefore we can say that Where T is switching period, Δ1 is a period for the negative inductor voltage, and Δ2 is a period for zero inductor voltage. The wave forms for DCM is represented in the figure below:- Figure 5: Boost converter waveforms at DCM. As the value of Lin is being calculated, initially it was the lowest inductance that can operate in CCM. In conclusion, any values of Lmin below than the minimum inductance will result in the boost converter to operate in DCM (Garcia, Pomilio and Spiazzi 2013). The calculation of the peak to peak ripple in the output voltage is similar to the one above. 4.0 Instantaneous simulation model Consider a circumstance where the time t is at zero; the transistor is switched on, and it remains on for the period ton. Then for time 0 < t < ton. The diode is described as biased reverse, and the inductor current and capacitor voltage are given:- With the initial conditions iL (0) > 0 and VC (0) > 0. Observe that when the transistor is on the input energy is stored in the inductance and the energy from the capacitor is transferred to the load resistance R (Teh and Mok 2015). In circumstances when the transistor is turned off after a delay ton. The circuit configuration changes. To simplify notation let us introduce a new coordinate T aligned to the time instances when the transistor switching occurs, i.e. T = t-ton. It depends on the diode state, for 0 < T < T off, the circuit is described by different sets of the equation (Teh and Mok 2015). If the diode D is on the iL (T) > 0 for all T and in that case we have; The DC-DC schematic diagram can be represented as shown in the figure below:- Figure 6: DC-DC boost converter schematic diagram The Matlab simulation process should give us the figure given below:- Figure 7: A Matlab/Simulink block diagram of a circuit realizes the proposed instantaneous DC/DC boost converter model. The equation is given by VC (T); With the underlying condition iL (0) > 0 and VC (0) > 0 separately. The condition that the inductor current is entirely positive for all T implying that this present streams without intrusion and subsequently such a state are known as the ceaseless current mode (CCM). Then again, if the diode D is off the present iL (T) = 0 beginning at some of the time cases T' and stay zero all through the rest of the cycle (Nge, Naing, Lwin and Latt 2014). At that point it can be depicted by the condition beneath:- , iL (T) = 0 With the main condition VC (T') > 0. For this situation the present stream in hindered and consequently the name intermittent current model (DCM) given to the converter working under such condition (Nge, Naing, Lwin and Latt 2014). With the perfect diode presumption set up, the condition iL (T) > 0 dependably holds. In conditions when the transistor is off the diode, the state is set up by the inductor current esteem. On the off chance that iL (T) > 0 the diode is on and it is off when iL (T) = 0. By and by, when leading numerical recreations, the inductor current is ascertained by incorporation, and in this manner, it never accomplishes zero on the spot (Zhang, et al., 2014). This demonstrates in a figuring step the instance of iL (T) < 0 is conceivable because of the way that Vs < Vc. This infers the reproduction display given by the condition above clarifying the diode in the non-directing state, when iL (T) < 0 can further be changed as:- , iL (T) = Ɛ; Where for this situation Ɛ speak to a moment undesirable amount. The esteem which is numerical is given as Ɛ is computed in the past computation step where the diode D was driving. Such an arrangement can be enlivened by the material science of semiconductor gadgets. Physical diodes under turn around predisposition do lead little current through the intersection (Zhang, et al., 2014). On the off chance that the discretization time step is adequately little, the parameter Ɛ has no impact on the conduct of the converter 5.0 Simulated system For this discussion, we have outlined a boost converter which is taking a shot at the CC< intended to help in venturing up a fluctuating sun powered board voltage a higher consistent yield of more than 24 voltage (Wang, Liu, Ma and Chen 2015). The scope of the obligation scale, for this situation, is between 0 to 75% because of the precariousness which is brought about by the parasitic segments (Wang, Liu, Ma and Chen 2015). The specification of the proposed design is shown in the table below:- Table 1.0: Design Specification Mode CCM Power Rating (P) 100 W Output voltage (Vout) 24 V Output Current (I out) 4.2 A Switching Frequency (f) 20 kHz Input voltage (Vin) 6- 23 V For us to deliver a consistent yield voltage, the voltage criticism control framework is utilized as a part of this case. In this control framework, the yield voltage will be measured and contrasted, and a reference voltage and the differential esteem is utilized as a part of delivering PWM signals (Garcia, Pomilio and Spiazzi 2013). Any adjustments in the yield voltage will bring about the progressions of the obligation cycle in the PWM flag. To create an arrangement of PWM flag, a microcontroller is utilized (Garcia, Pomilio and Spiazzi 2013). The PIC16T877 microcontroller is chosen as it is having a progressive guess simple to –digital converter, comparator, and the PWM generator (Garcia, Pomilio and Spiazzi 2013). PWM motion with recurrence 20 kHz clock cycle. Control strategy for voltage feedback control flow chart is illustrated in the figure below:- Figure 8: Control flow chart. 5.1 Process of selecting electronic switch The SW switch is chosen in view of its general voltage and the present rating which must be more than the most extreme information voltage and the current. From the proposed framework, the rating of the converter is 100 W with an information voltage extending from 6 voltage to 23 voltage. In this manner, an electronic switch, for example, the MOSFET, IGBT and BJT and the thyristor taking care of capacity ought to meet the required detail of the proposed outline (Garcia, Pomilio and Spiazzi 2013) 5.2 The inductor selection The minimum inductance for the boost converter to operate smoothly is CCM is given Therefore, choosing of the inductor should be higher than the calculated value. Inductors with a ferrite core or similar are recommended in this case. 5.3 Diode selection The principle thought is the choice of the diode is the invert voltage rating. Other vital thought is its capacity to close the required off-state voltage push and has adequate pinnacle and normal current taking care of ability, quick exchanging qualities, low turn around recuperation and low forward voltage drop. 5.4 Capacitor selection process The equation used in calculating the output voltage ripple using the capacitance is given as:- One important consideration in the selection of capacitor is that it should have higher than the value calculated to make sure that the converter’s output voltage ripple stay within the specific range. Furthermore, it is important to consider the equivalent series resistance since the capacitor's resistance affect efficiency (Zhang, et al., 2014). Therefore low ESR capacitor is recommended to reduce by connecting few capacitors in parallel. 6.0 Simulation results Based on the design which was proposed, PSCAD was used in the simulation process to help in designing the boost converter's performance. The results of simulation of the boost converter with the distinct input voltage and the duty cycle are shown in the figures bellows. Figure 9: Simulation waveforms for output voltage, output current and inductor current at 25% duty cycle. Figure 10: Simulation waveforms for output voltage, output current and inductor current at 75% duty cycle. From the results of the simulation, the proposed converter can give a constant of 24 voltage of output at 100 watts load. 7.0 The results of experiment The exploratory estimation being done to help in checking the execution of the boost changed over proposed. Supply of force is associated with Vin and a resistance load is associated with Vout as appeared in the writing above. The consequences of test yield at various voltages is demonstrated as follows:- (a) (b) Figure 11: Yield voltage waveform and PWM motion from PIC16F877 (a) with 19 V input voltage and 20% obligation cycle (b) with 7 V input voltage and 70% obligation cycle From the results of the experiment, it shows that the design which is proposed can produce a constant of 24 voltage of output with the duty cycle of 70% and 20%. The results of the experiment for the boost converter which is proposed at different loads are recorded in the table below:- Table 2: Experimental results Input voltage (V) Input Current (A) Duty Cycle Output Voltage Efficiency (%) 23 4.57 0.04 24.1 95.1 15 8.23 0.38 24 81.0 From the outcomes, the effectiveness of the boost converter is figured as the proportion of yield energy to information control. The productivity can be expanded by diminishing the aggregate misfortunes of the converter. The misfortunes in a boost converter comprise of exchanging misfortune conduction misfortune, inductor's swirl current and hysteresis misfortune. ESR and electromagnetic impedance. Delicate exchanging can diminish exchanging misfortunes in a boost converter. The graph of efficiency is shown below Figure 12: Efficiency versus output power for the boost converter. 8.0 Conclusion The exchanged mode control supply show introduced here can be utilized to help in investigating the power supply operations in various conditions. The model effectively predicts the capacities and qualities of both the persistent current mode (CCM) and spasmodic current mode (DCM). We exhibit that the states of the open circle step reaction waveforms of the model and a genuine circuit are in assention. All things considered, to acquire correct numerical correspondences, it is important to incorporate non-perfect part models of aloof and dynamic components. It is additionally urgent to note that from the proposed outline, the boost converter can create a steady yield voltage of around 24 voltage frame a variable voltage of sun powered board. The boost converter can convey control with the most elevated amount of productivity of 95%. The components had been chosen based on serious consideration of the expected outcome. The simulation was carried out in the PSCAD and gives the expected results of switching mode. 9.0 Areas for further study Some of the recommended areas of further study include:- Investigating the single inductor multiple output switch of DC-DC converters Investigating more than three types of power distribution and simulation Examining the micro turbine power generation and power electronic converter These areas mostly remain open, and available literature is very limited hence should be given priority with the aim of adding more literature and giving an alternative to the existing research body. Bibliography Dogra, A. and Pal, K., 2014. The design of Buck-Boost Converter for Constant Voltage Applications and Its Transient Response Due To Parametric Variation of PI Controller. International Journal of Innovative Research in Science, Engineering, and Technology, 3(6). Garcia, F.S., Pomilio, J.A. and Spiazzi, G., 2013. Modeling and control design of the interleaved second dual boost converter. IEEE Transactions On Industrial Electronics, 60(8), pp.3283-3290. Lee, M.C., and Jung, W.S., 2016, March. Implementation and Design of Voltage-Mode CMOS PWM Boost Power Converter with Feedforward and Feedback Control Circuit. In Environmental Science and Sustainable Development: International Conference on Environmental Science and Sustainable Development (ICESSD 2015) (pp. 376-383). World Scientific. NGE, Y., NAING, Z., Lwin, K.S. and Latt, M.M., 2014. Design Implementation of Boost Converter for Variable Speed Small Wind Turbine. Teh, Y.K. and Mok, P.K., 2015, August. Design consideration of recent advanced low-voltage CMOS boost converter for energy harvesting. In Circuit Theory and Design (ECCTD), 2015 European Conference on (pp. 1-4). IEEE. Wang, Y., Liu, W., Ma, H. and Chen, L., 2015. Resonance analysis and soft-switching design of isolated boost converter with coupled inductors for vehicle inverter application. IEEE Transactions on Power Electronics, 30(3), pp.1383-1392. Zhang, W., Tan, X., Wang, K., Li, T. and Chen, J., 2016. Design for boost DC-DC converter controller based on state-space average method. Integrated Ferroelectrics, 172(1), pp.152-159. Zhang, X., Jiang, L., Deng, J., Li, S. and Chen, Z., 2014. Analysis and design of a new soft-switching boost converter with a coupled inductor. IEEE Transactions on Power Electronics, 29(8), pp.4270-4277. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter Assignment Example | Topics and Well Written Essays - 1750 words, n.d.)
Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter Assignment Example | Topics and Well Written Essays - 1750 words. https://studentshare.org/engineering-and-construction/2055925-power-electronics-assignment
(Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter Assignment Example | Topics and Well Written Essays - 1750 Words)
Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter Assignment Example | Topics and Well Written Essays - 1750 Words. https://studentshare.org/engineering-and-construction/2055925-power-electronics-assignment.
“Design and Simulation of a Flexible Multi-Input and Single-Out (MISO) Boost Converter Assignment Example | Topics and Well Written Essays - 1750 Words”. https://studentshare.org/engineering-and-construction/2055925-power-electronics-assignment.
  • Cited: 0 times
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us